BS EN 10140-2006 Cold rolled narrow steel strip. Tolerances on dimensions and shape
|
ID： |
A143D250B57A452FBBCCE3F17D88D8F3 |
|
文件大小(MB)： |
0.21 |
|
页数： |
14 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10140:2006,Cold rolled narrow,steel strip — Tolerances,on dimensions and,shape,The European Standard EN 10140:2006 has the status of a,British Standard,ICS 77.140.50, , , ,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sat Jun 30 03:23:48 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS EN 10140:2006,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee,on 31 July 2006,. BSI 2006,ISBN 0 580 48669 9,National foreword,This British Standard is the official English language version of,EN 10140:2006. It supersedes BS EN 10140:1997 which is withdrawn.,The UK participation in its preparation was entrusted to Technical Committee,ISE/10, Flat rolled steels products, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of British,Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible international/European committee any,enquiries on the interpretation, or proposals for change, and keep UK,interests informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 11 and a back cover.,The BSI copyright notice displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sat Jun 30 03:23:48 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10140,July 2006,ICS 77.140.50 Supersedes EN 10140:1996,English Version,Cold rolled narrow steel strip - Tolerances on dimensions and,shape,Feuillards laminés à froid - Tolérances de dimensions et de,forme,Kaltband - Grenzabma遝 und Formtoleranzen,This European Standard was approved by CEN on 12 June 2006.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2006 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 10140:2006: E,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sat Jun 30 03:23:48 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EN 10140:2006 (E),2,Contents,Foreword3,1 Scope .4,2 Normative references ..4,3 Terms and definitions .4,4 Form and conditions of delivery 4,4.1 Form of delivery..4,4.2 Condition of delivery 5,5 Designation 5,6 Tolerances on dimensions 6,6.1 Thickness 6,6.2 Width ..6,6.3 Length 7,7 Tolerances on shape 8,7.1 Edge camber .8,7.2 Flatness of cut lengths8,7.3 Out-of-squareness.8,8 Measurements..9,8.1 Thickness 9,8.2 Flatness of cut lengths9,8.3 Edge camber ..10,9 Packing ..10,Bibliography.11,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sat Jun 30 03:23:48 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EN 10140:2006 (E),3,Foreword,This do……
……